ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ROYAL ENFIELD
E4.ROY.10.ULTRA
ROYAL ENFIELD Continental 650 2021>2024
Ultracone
Dual slip-on exhausts including removable db killers and link pipes E4.ROY.10.ULTRA
Not homologatedTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
KAWASAKI
CO.K.169.RACEDB.FXSC
KAWASAKI Versys 650 2017>2020
Furore-X Inox
Full system exhaust, including removable db killer CO.K.169.RACEDB.FXSC Note: Not homologated
The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust may has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
KAWASAKI
E5.CO.K.169.1.DBHOM.M3.INOX
KAWASAKI Versys 650 2023>2024
M3 Inox
Full system exhaust, including removable db killer E5.CO.K.169.1.DBHOM.M3.INOX Note: The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.
Low PositionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
TRIUMPH
E5.T.94.DBHOM.PCEV
TRIUMPH Trident 660 2021>2024
Powercone Evo
Full system exhaust, including removable db killer E5.T.94.DBHOM.PCEV Note: Low Position
High level. Includes lambda probe wiring extension.ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.219.DBHOM.PC
YAMAHA FJ-09 2021>2024
Powercone Evo
Full system exhaust, including removable db killer E5.CO.Y.219.DBHOM.PC Note: High level. Includes lambda probe wiring extension.
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.169.DBHOM.FXSC
KAWASAKI Versys 650 2021>2022
Furore-X Inox
Full system exhaust, including removable db killer E5.CO.K.169.DBHOM.FXSC
It is to mount in a high level positionThe installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
CO.Y.230.2.DBHOM.ALB
YAMAHA Tracer 9 2025>2026
Albus Evo4
Full system exhaust, including removable db killer CO.Y.230.2.DBHOM.ALB Note: It is to mount in a high level position
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Suzuki
E5.S.192.GT.M3.TN
Suzuki GSX-S1000GT 2021>2025
M3 Titanium Natural
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.S.192.GT.M3.TN
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
TRIUMPH
T.89.VIC
TRIUMPH Street Twin 900 2015>2019
Vintacone
Dual slip-on including removable db killers and link pipes, EPA-compliant T.89.VIC
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E4.CO.K.160.DBHOM.M3.INOX
KAWASAKI Z-650 2017>2020
M3 Inox
Full system exhaust, including removable db killer E4.CO.K.160.DBHOM.M3.INOX
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
Honda
SCOM.162.FXSC
Honda Silver Wing 150 - S-Wing 150 2009>2013
Furore-X Scooter
Full system exhaust, including removable db killer SCOM.162.FXSC
Not homologatedTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
KAWASAKI
CO.K.179.RACEDB.FXSC
KAWASAKI Versys 650 2021>2022
Furore-X Inox
Full system exhaust, including removable db killer CO.K.179.RACEDB.FXSC Note: Not homologated
Requires cutting the original headerThis is a universal kit, designed for transformations and customizations. Because it does not include link pipes or brackets, it requires changes to the manifold for proper installation.This is not a plug-and-play installation. Due to the complexity, the installation requires a professional shop that specializes in Cafè Racers. The installation requires installing, cutting the original header and creating the connection to the silencer directly on the motorbike. This kit does not include link pipes, and the professional mechanic must manufacture or create a link pipe and fitting.
Moto Guzzi
CAFE.64.ULTRA
Moto Guzzi Daytona 1000 i.e. 1992>1999
Ultracone Inox Cafè Racer
Universal silencer without link pipe, EPA-compliant requirements CAFE.64.ULTRA Note: Requires cutting the original header
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
TRIUMPH
E4.T.89.VIC
TRIUMPH Street Twin 900 2020>2021
Vintacone
Dual slip-on including removable db killers and link pipes, EPA-compliant E4.T.89.VIC
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
E5.Y.232.1.FUXIO
YAMAHA Tenere 700 2025>2026
Furore-X Acciaio Inox
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.Y.232.1.FUXIO
The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust may has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
KAWASAKI
E5.CO.K.169.1.DBHOM.FXSC
KAWASAKI Versys 650 2023>2024
Furore-X Inox
Full system exhaust, including removable db killer E5.CO.K.169.1.DBHOM.FXSC Note: The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.
The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust may has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
KAWASAKI
E5.CO.K.161.2.DBHOM.M3.INOX
KAWASAKI Ninja 650 EX650M 2023>2024
M3 Inox
Full system exhaust, including removable db killer E5.CO.K.161.2.DBHOM.M3.INOX Note: The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.
This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
YAMAHA
E5.Y.232.1.HYSOIN
YAMAHA Tenere 700 2025>2026
Hyper Sonic Inox
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.Y.232.1.HYSOIN
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
Honda
SCOM.107.FXSC
Honda SH350 I.E. 2006>2015
Furore-X Scooter
Full system exhaust, including removable db killer SCOM.107.FXSC
It is to mount in a high level positionThe installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
CO.Y.230.2.DBHOM.M3.BT
YAMAHA Tracer 9 2025>2026
M3 Black Titanium
Full system exhaust, including removable db killer CO.Y.230.2.DBHOM.M3.BT Note: It is to mount in a high level position
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Moto Guzzi
GU.15.1.FUNE
Moto Guzzi Norge 850 2006>2011
Furore Nero
Slip-on exhaust including removable db killer and link pipe, EPA-compliant GU.15.1.FUNE
The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust may has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
KAWASAKI
E5.CO.K.187.DBHOM.M3.INOX
KAWASAKI Z-650 EX650M 2023>2024
M3 Inox
Full system exhaust, including removable db killer E5.CO.K.187.DBHOM.M3.INOX Note: The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
E5.Y.232.1.FUXTIT
YAMAHA Tenere 700 2025>2026
Furore-X Titanio
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.Y.232.1.FUXTIT
Fits both original silencers and GPR pipesTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube. For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store. As racing exhaust, there is not a removable db killer (noise restrictor), large part of time is possible buy as spare parts, not use the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense. GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. Catalyst Eliminator: The GPR manifold eliminates the original catalyst.
BMW
BM.94.DEC
BMW F850GS - Adventure 2018>2020
Decatalizzatore
Decat pipe BM.94.DEC Note: Fits both original silencers and GPR pipes
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E4.CO.K.160.DBHOM.FXSC
KAWASAKI Z-650 2017>2020
Furore-X Inox
Full system exhaust, including removable db killer E4.CO.K.160.DBHOM.FXSC
It is to mount in a high level positionThe installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
CO.Y.230.2.DBHOM.M3.INOX
YAMAHA Tracer 9 2025>2026
M3 Inox
Full system exhaust, including removable db killer CO.Y.230.2.DBHOM.M3.INOX Note: It is to mount in a high level position
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Moto Guzzi
GU.15.1.FUPO
Moto Guzzi Norge 850 2006>2011
Furore Poppy
Slip-on exhaust including removable db killer and link pipe, EPA-compliant GU.15.1.FUPO
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
KAWASAKI
E5.K.177.DE
KAWASAKI Z-900E 2020>2024
Deeptone Inox
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.K.177.DE
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.169.DBHOM.M3.INOX
KAWASAKI Versys 650 2021>2022
M3 Inox
Full system exhaust, including removable db killer E5.CO.K.169.DBHOM.M3.INOX
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
E5.Y.232.1.7.FUXTITBL
YAMAHA Tenere 700 2025>2026
Furore-X Titanio Nero
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.Y.232.1.7.FUXTITBL
Fits both original silencers and GPR pipesTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube. For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store. As racing exhaust, there is not a removable db killer (noise restrictor), large part of time is possible buy as spare parts, not use the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense. GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. Catalyst Eliminator: The GPR manifold eliminates the original catalyst.
BMW
BM.94.1.DEC
BMW F850GS - Adventure 2021>2024
Decatalizzatore
Decat pipe BM.94.1.DEC Note: Fits both original silencers and GPR pipes
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Honda
SCOM.107.RACE.FXSC
Honda SH350 I.E. 2006>2015
Furore-X Scooter
Racing full system including manifold and removable db killer SCOM.107.RACE.FXSC
Not homologatedTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
KAWASAKI
CO.K.160.RACEDB.FXSC
KAWASAKI Z-650 2017>2020
Furore-X Inox
Full system exhaust, including removable db killer CO.K.160.RACEDB.FXSC Note: Not homologated
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Moto Guzzi
GU.15.1.TRI
Moto Guzzi Norge 850 2006>2011
Trioval
Slip-on exhaust including removable db killer and link pipe, EPA-compliant GU.15.1.TRI
It mount in a high positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.222.DBHOM.PC
YAMAHA XSR900 2022>2024
Powercone Evo
Full system exhaust, including removable db killer E5.CO.Y.222.DBHOM.PC Note: It mount in a high position
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
E5.Y.232.1.DUAL.IO
YAMAHA Tenere 700 2025>2026
Dual Inox
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.Y.232.1.DUAL.IO
It mounts without the need for modifications Screws and spacers included It is compatible ONLY with Alpi-Tech GPR TECH top cases Ergonomic shockproof and not sharp, Titanium made, 100% Italian technology
BMW
TIT.PIA.BM.20.UNI.1
BMW F 850 Gs 2018>2020
compatible with original luggage rack,titanium made with 4 anchor points
SPECIFIC TITANIUM PLATE TOP CASE-ALPITECH 35/55 LT TIT.PIA.BM.20.UNI.1
RACING PRODUCT: This exhaust is supplied with a removable DB Killer. However, it is a RACING product and is not legal for road use.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Honda
HON.10.RACE.FXSC
Honda SH350 I.E. 2016>2020
Furore-X Scooter
Racing full system including manifold and removable db killer HON.10.RACE.FXSC
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
BMW
E4.BMW.94.FXSC
BMW F850GS - Adventure 2018>2020
Furore-X Inox
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E4.BMW.94.FXSC
Not homologatedTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
KAWASAKI
CO.K.160.1.RACEDB.FXSC
KAWASAKI Z-650 2021>2022
Furore-X Inox
Full system exhaust, including removable db killer CO.K.160.1.RACEDB.FXSC Note: Not homologated
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Moto Guzzi
E4.GU.61.FNE4
Moto Guzzi V85TT 2019>2020
Furore Evo4 Nero
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E4.GU.61.FNE4
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
YAMAHA
E5.Y.232.1.DUAL.PO
YAMAHA Tenere 700 2025>2026
Dual Poppy
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.Y.232.1.DUAL.PO
It mounts without the need for modifications Screws and spacers included It is compatible ONLY with Alpi-Tech GPR TECH top cases Ergonomic shockproof and not sharp Stainless steel made Italian technology
BMW
PIA.BM.20.SP.35.1
BMW F 850 Gs 2018>2020
compatible with original luggage rack,stainless steel made with 4 anchor points
Specific fitting plate Top Case ALPITECH 35 LT PIA.BM.20.SP.35.1
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
BMW
E5.BM.94.FXSC
BMW F850GS - Adventure 2021>2024
Furore-X Inox
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.BM.94.FXSC
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E5.CO.K.160.1.DBHOM.M3.INOX
KAWASAKI Z-650 2021>2022
M3 Inox
Full system exhaust, including removable db killer E5.CO.K.160.1.DBHOM.M3.INOX
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. Hyper Sonic Black Titanium is part of the new generation of GPR exhausts, realized with a production process with zero environmental impact. It has dual outlets, black sleeve titanium made and caps CNC-machined in order to obtain maximum power increase and a better sound.
FEATURES • SOUND: Upgraded sound from stock exhaust • PERFORMANCE: Upgraded performance from stock exhaust • QUALITY: Italian made with high-grade welding • WEIGHT: Lighter than stock exhaust
YAMAHA
E5.Y.232.1.HYSOBLK
YAMAHA Tenere 700 2025>2026
Hyper Sonic Black Titanium
Slip-on exhaust including removable db killer and link pipe, EPA-compliant E5.Y.232.1.HYSOBLK
All shipments are carried out by logistics in Orlando - USA
We inform you that we use first- and third-party cookies in order to improve the performance of the page and for analytical and advertising purposes. If you want more information or would like to manage them, please go to the Cookie settings.
Manage preferences
MandatoryAnalytics and advertising
Technical: These are necessary for navigation and the proper functioning of our website. They allow, for example, to control traffic and data communication, access restricted areas, complete the purchase process, use security features, store content to broadcast videos, or share content through social networks.
Personalization: These allow the User to access the service with predefined characteristics based on a series of criteria, such as language, the type of browser used to access the service, the regional settings from which the service is accessed, etc.
Finality
Provider
Name
Administration
Function
Vigency
Technical
Own cookie
validacions_cookies
Own
Managing cookie acceptance.
1 year
Personalization
Own cookie
(Aleatory)
Own
Visitor session management.
At the end of the browser session.
De análisis: son aquellas que, tratadas por nosotros o por terceros, nos permiten cuantificar el número de usuarios y así realizar la medición y análisis estadístico de la utilización que hacen los usuarios del servicio ofertado. Para ello se analiza su navegación en nuestra página web con el fin de mejorar la oferta de productos o servicios que le ofrecemos.
