It is to mount in a high level position For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
TRIUMPH
E5.T.95.RACEDB.DE
TRIUMPH Trident 660 2021>2024
Deeptone Inox
Full system exhaust, including removable db killer E5.T.95.RACEDB.DE Note: It is to mount in a high level position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
Suzuki
CO.S.208.DBHOM.1.GPAN.TO
Suzuki GSX-S950 2021>2025
New Grand Prix Evo Titanium
Full system exhaust, including removable db killer CO.S.208.DBHOM.1.GPAN.TO
Requires purchase of control unit valve, Healtech by Faster96, which also fits original exhaust.To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube. For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store. As racing exhaust, there is not a removable db killer (noise restrictor), large part of time is possible buy as spare parts, not use the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense. GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. Catalyst Eliminator: The GPR manifold eliminates the original catalyst.
BMW
CO.BM.107.DEC
BMW R1250R R1250RS 2019>2020
Decatalizzatore
Decat pipe CO.BM.107.DEC Note: Requires purchase of control unit valve, Healtech by Faster96, which also fits original exhaust.
Fits both original silencers and GPR pipesTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube. For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store. As racing exhaust, there is not a removable db killer (noise restrictor), large part of time is possible buy as spare parts, not use the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense. GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. Catalyst Eliminator: The GPR manifold eliminates the original catalyst.
KAWASAKI
K.174.1.RACE.DEC
KAWASAKI Z400 2018>2022
Decatalizzatore
Decat pipe K.174.1.RACE.DEC Note: Fits both original silencers and GPR pipes
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
BMW
E5.BM.DBHOM.93.FNE5
BMW G310R 2022>2026
Furore Evo4 Nero
Full system exhaust, including removable db killer E5.BM.DBHOM.93.FNE5
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.CO.H.249.DBHOM.ALBE4
Honda CB650F 2017>2018
Albus Evo4
Full system exhaust, including removable db killer E4.CO.H.249.DBHOM.ALBE4
It is to mount in a high level position For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
TRIUMPH
E5.T.99.RACEDB.DE
TRIUMPH Tiger Sport 660 2022>2024
Deeptone Inox
Full system exhaust, including removable db killer E5.T.99.RACEDB.DE Note: It is to mount in a high level position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Aprilia
E4.A.73.DBHOM.FXSC
Aprilia Rsv4 1100 Racing Factory 2019>2020
Furore-X Inox
Slip-on exhaust including link pipe and removable db killer E4.A.73.DBHOM.FXSC
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.337.3.DBHOM.FXSC
YAMAHA Tracer 7 GT 2020>2024
Furore-X Inox
Full system exhaust, including removable db killer Y.337.3.DBHOM.FXSC
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Benelli
E5.BE.24.DBHOM.FNE4
Benelli Trk 502 2021>2024
Furore Evo4 Nero
Slip-on exhaust including link pipe and removable db killer E5.BE.24.DBHOM.FNE4
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.225.DBHOM.M3.BT
YAMAHA FZ-7 MT07 2021>2024
M3 Black Titanium
Full system exhaust, including removable db killer Y.225.DBHOM.M3.BT Note: It is mounted in a lateral position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.CO.H.261.1.DBHOM.ALBE4
Honda CBR650R 2019>2020
Albus Evo4
Full system exhaust, including removable db killer E4.CO.H.261.1.DBHOM.ALBE4
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.Y.210.DBHOM.ALBE4
YAMAHA YZF 125 R 2017>2018
Albus Ceramic
Full system exhaust, including removable db killer E4.Y.210.DBHOM.ALBE4
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
BMW
E5.BM.DBHOM.106.FNE5
BMW G310GS 2022>2026
Furore Evo4 Nero
Full system exhaust, including removable db killer E5.BM.DBHOM.106.FNE5
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.CO.H.260.1.DBHOM.ALBE4
Honda CB650R 2019>2020
Albus Evo4
Full system exhaust, including removable db killer E4.CO.H.260.1.DBHOM.ALBE4
Requires purchase of control unit valve, Healtech by Faster96, which also fits original exhaust.To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube. For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store. As racing exhaust, there is not a removable db killer (noise restrictor), large part of time is possible buy as spare parts, not use the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense. GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. Catalyst Eliminator: The GPR manifold eliminates the original catalyst.
BMW
CO.E5.BM.107.DEC
BMW R1250R R1250RS 2021>2024
Decatalizzatore
Decat pipe CO.E5.BM.107.DEC Note: Requires purchase of control unit valve, Healtech by Faster96, which also fits original exhaust.
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
BMW
E4.BM.DBHOM.93.FNE4
BMW G310R 2017>2021
Furore Evo4 Nero
Full system exhaust, including removable db killer E4.BM.DBHOM.93.FNE4
High level. Includes lambda probe wiring extension.ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.219.DBHOM.M3.BT
YAMAHA FJ-09 2021>2024
M3 Black Titanium
Full system exhaust, including removable db killer E5.CO.Y.219.DBHOM.M3.BT Note: High level. Includes lambda probe wiring extension.
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.CO.H.249.1.DBHOM.ALBE4
Honda CBR650F 2017>2018
Albus Evo4
Full system exhaust, including removable db killer E4.CO.H.249.1.DBHOM.ALBE4
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Aprilia
E4.A.74.DBHOM.FXSC
Aprilia Tuono 1100 V4 Rr 2017>2020
Furore-X Inox
Slip-on exhaust including link pipe and removable db killer E4.A.74.DBHOM.FXSC
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.Y.198.DBHOM.FXSC
YAMAHA Tracer 700 2016>2019
Furore-X Inox
Full system exhaust, including removable db killer E4.Y.198.DBHOM.FXSC
Fits both original silencers and GPR pipesTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube. For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store. As racing exhaust, there is not a removable db killer (noise restrictor), large part of time is possible buy as spare parts, not use the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense. GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. Catalyst Eliminator: The GPR manifold eliminates the original catalyst.
YAMAHA
CO.Y.58.DEC
YAMAHA Xt 600 - E - K 1985>2002
Decatalizzatore
Decat pipe CO.Y.58.DEC Note: Fits both original silencers and GPR pipes
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.206.DBHOM.ALB
YAMAHA Mt 125 2017>2019
Albus Ceramic
Full system exhaust, including removable db killer Y.206.DBHOM.ALB
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E5.CO.H.261.1.DBHOM.ALBE5
Honda CBR650R 2021>2023
Albus Evo4
Full system exhaust, including removable db killer E5.CO.H.261.1.DBHOM.ALBE5
The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust may has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
Kove
KOV.1.DEC
Kove 800X 2024>2026
Decatalizzatore RACING
Decat pipe KOV.1.DEC Note: The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E4.H.248.DBHOM.FNE4
Honda CRF250L / Rally 2017>2020
Furore Evo4 Nero
Slip-on exhaust including link pipe and removable db killer E4.H.248.DBHOM.FNE4
Silencer position under engineATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.CO.Y.195.1.DBHOM.M3.BT
YAMAHA FJ-09 Tracer GT 2018>2020
M3 Black Titanium
Full system exhaust, including removable db killer E4.CO.Y.195.1.DBHOM.M3.BT Note: Silencer position under engine
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.CO.Y.201.1.DBHOM.M3.PP
YAMAHA Tracer 9 GT 2021>2024
M3 Poppy
Full system exhaust, including removable db killer E4.CO.Y.201.1.DBHOM.M3.PP Note: It is to mount in a high level position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E5.CO.H.260.2.DBHOM.ALBE5
Honda CB650F 2019>2022
Albus Evo4
Full system exhaust, including removable db killer E5.CO.H.260.2.DBHOM.ALBE5
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Silencer position under engineATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.CO.Y.202.DBHOM.M3.BT
YAMAHA FJ-09 Tracer 2017>2020
M3 Black Titanium
Full system exhaust, including removable db killer E4.CO.Y.202.DBHOM.M3.BT Note: Silencer position under engine
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Honda
E5.CO.H.260.1.DBHOM.ALBE5
Honda CB650R 2021>2023
Albus Ceramic
Full system exhaust, including removable db killer E5.CO.H.260.1.DBHOM.ALBE5
The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust may has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
Voge
VO.7.COL
Voge 900DSX 2024>2025
Decatalizzatore RACING
Decat pipe VO.7.COL Note: The installation of an aftermarket exhaust may result in an "engine failure" error message. This message can only be eliminated with the use of additional control units. We recommend reading the instructions included in the package or the tutorials available on www.gpr.it and YouTube.
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.DBHOM.FXSC
YAMAHA Tracer 700 2020>2021
Furore-X Inox
Full system exhaust, including removable db killer Y.227.DBHOM.FXSC
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Kit removes the original catalyst For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
ROYAL ENFIELD
ROY.12.RACE.DE
ROYAL ENFIELD Classic 350 2021>2023
Deeptone Inox
Slip-on exhaust including link pipe ROY.12.RACE.DE Note: Kit removes the original catalyst
Low Position For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
TRIUMPH
E5.T.94.RACEDB.DE
TRIUMPH Trident 660 2021>2024
Deeptone Inox
Full system exhaust, including removable db killer E5.T.94.RACEDB.DE Note: Low Position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
DUCATI
E4.D.136.DBHOM.FXSC
DUCATI Diavel 1198 2017>2019
Furore-X Inox
Slip-on exhaust including link pipe and removable db killer E4.D.136.DBHOM.FXSC
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
KAWASAKI
E4.K.165.1.DBHOM.FXSC
KAWASAKI Versys X 250 2017>2020
Furore-X Inox
Slip-on exhaust including link pipe and removable db killer E4.K.165.1.DBHOM.FXSC
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
DUCATI
E4.D.133.DBHOM.FUNE
DUCATI Monster 821 2017>2021
Furore Nero
Slip-on exhaust including link pipe and removable db killer E4.D.133.DBHOM.FUNE
It mount in a high positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E5.CO.Y.222.DBHOM.M3.BT
YAMAHA XSR900 2022>2024
M3 Black Titanium
Full system exhaust, including removable db killer E5.CO.Y.222.DBHOM.M3.BT Note: It mount in a high position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Husqvarna
E5.HU.56.DBHOM.ALBE5
Husqvarna Supermoto 701 2021>2024
Albus Evo4
Slip-on exhaust including link pipe and removable db killer E5.HU.56.DBHOM.ALBE5
Low Position For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
TRIUMPH
E5.T.97.RACEDB.DE
TRIUMPH Tiger Sport 660 2022>2024
Deeptone Inox
Full system exhaust, including removable db killer E5.T.97.RACEDB.DE Note: Low Position
Racing System with DB Killer, Not HomologatedATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Suzuki
CO.S.208.DBHOM.2.DE
Suzuki GSX-S1000 2015>2016
Deeptone Inox
Full system exhaust, including removable db killer CO.S.208.DBHOM.2.DE Note: Racing System with DB Killer, Not Homologated
Kit removes the original catalyst For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
ROYAL ENFIELD
ROY.10.RACE.DE
ROYAL ENFIELD Meteor 350 2021>2023
Deeptone Inox
Slip-on exhaust including link pipe ROY.10.RACE.DE Note: Kit removes the original catalyst
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
BMW
E5.BM.DBHOM.106.M3.PP
BMW G310GS 2022>2026
M3 Poppy
Full system exhaust, including removable db killer E5.BM.DBHOM.106.M3.PP
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific link pipe, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
Husqvarna
E5.HU.55.DBHOM.ALBE5
Husqvarna Enduro 701 2021>2024
Albus Evo4
Slip-on exhaust including link pipe and removable db killer E5.HU.55.DBHOM.ALBE5
All shipments are carried out by logistics in Orlando - USA
We inform you that we use first- and third-party cookies in order to improve the performance of the page and for analytical and advertising purposes. If you want more information or would like to manage them, please go to the Cookie settings.
Manage preferences
MandatoryAnalytics and advertising
Technical: These are necessary for navigation and the proper functioning of our website. They allow, for example, to control traffic and data communication, access restricted areas, complete the purchase process, use security features, store content to broadcast videos, or share content through social networks.
Personalization: These allow the User to access the service with predefined characteristics based on a series of criteria, such as language, the type of browser used to access the service, the regional settings from which the service is accessed, etc.
Finality
Provider
Name
Administration
Function
Vigency
Technical
Own cookie
validacions_cookies
Own
Managing cookie acceptance.
1 year
Personalization
Own cookie
(Aleatory)
Own
Visitor session management.
At the end of the browser session.
De análisis: son aquellas que, tratadas por nosotros o por terceros, nos permiten cuantificar el número de usuarios y así realizar la medición y análisis estadístico de la utilización que hacen los usuarios del servicio ofertado. Para ello se analiza su navegación en nuestra página web con el fin de mejorar la oferta de productos o servicios que le ofrecemos.
