It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
Y.227.RACE.M3.INOX
M3 Inox
Full system exhaust, including removable db killer Y.227.RACE.M3.INOX Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR's New Grand Prix Evo Titanium, it has been created to celebrate 20 years of presence in the MotoGP/Moto2/Moto3 world championship, in fact, the presentation of the first Grand Prix line dates back to 2005, on the occasion of the debut with Team Konica Minolta and driver Makoto Tamada and Team LCR with driver Casey Stoner. The Silencer is conical, with a special shape starting from a diameter 90mm to arriva at 130mm of circonference and lenght that depend from the motorbike of destination. It has a sleever made in titanium realized with natural color, black endcap made through CNC machining with pentagonal exit and dbkiller.
FEATURES
• SOUND: Upgraded sound from stock exhaust.
• PERFORMANCE: Upgraded performance from stock exhaust
• QUALITY: Italian made with high-grade welding
• WEIGHT: Lighter than stock exhaust
YAMAHA
E5.Y.227.CAT.GPAN.TO
New Grand Prix Evo Titanium
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.Y.227.CAT.GPAN.TO Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR's New Grand Prix Evo Titanium, it has been created to celebrate 20 years of presence in the MotoGP/Moto2/Moto3 world championship, in fact, the presentation of the first Grand Prix line dates back to 2005, on the occasion of the debut with Team Konica Minolta and driver Makoto Tamada and Team LCR with driver Casey Stoner. The Silencer is conical, with a special shape starting from a diameter 90mm to arriva at 130mm of circonference and lenght that depend from the motorbike of destination. It has a sleever made in titanium realized with natural color, black endcap made through CNC machining with pentagonal exit and dbkiller.
FEATURES
• SOUND: Upgraded sound from stock exhaust.
• PERFORMANCE: Upgraded performance from stock exhaust
• QUALITY: Italian made with high-grade welding
• WEIGHT: Lighter than stock exhaust
YAMAHA
Y.227.RACEDB.GPAN.TO
New Grand Prix Evo Titanium
Full system exhaust, including removable db killer Y.227.RACEDB.GPAN.TO Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.Y.227.CAT.SAT
Satinox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.Y.227.CAT.SAT Note: It is mounted in a lateral position
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.DBHOM.SAT
Satinox
Full system exhaust, including removable db killer Y.227.DBHOM.SAT Note: It is mounted in a lateral position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.1.DBHOM.ALBUS
Albus Ceramic
Full system exhaust, including removable db killer Y.227.1.DBHOM.ALBUS
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.1.DBHOM.DE
Deeptone Inox
Full system exhaust, including removable db killer Y.227.1.DBHOM.DE Note: It is mounted in a lateral position
It is mounted in a lateral position For installation, no structural modifications to the motorcycle are required for use of the product in an approved version. It is recommended to read the instructions in the package or the tutorials visible on www.gpr.it and on youtube. For on-line purchases it is necessary to activate the warranty by sending the special coupon stamped by the installation workshop via email to certificato@gpr.it, for purchases at physical stores the shop stamp is sufficient. The exhaust has a removable db killer (noise restrictor) for racing use, remove the db killer is not ONLY illegal, but the customer assumes the responsibility to use the motorbike as on the circuits only, without bags, without flash light and number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected. The warranty is two years from the purchase, with right of reparation with devolution to GPR factory or nearest official distributor at client expenses. GPR cannot provide a new silencer instead of the one to repair, the client has to accept to remount the original exhaust or wait the standard time for the reparation. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
Y.227.1.RACE.DE
Deeptone Inox
Full system exhaust, including removable db killer Y.227.1.RACE.DE Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.Y.227.1.CAT.FUNE
Furore Nero
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.Y.227.1.CAT.FUNE Note: It is mounted in a lateral position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.1.DBHOM.FUNE
Furore Nero
Full system exhaust, including removable db killer Y.227.1.DBHOM.FUNE
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
Y.227.1.RACEDB.FUNE
Furore Nero
Full system exhaust, including removable db killer Y.227.1.RACEDB.FUNE Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.Y.227.1.CAT.FXSC
Furore-X Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.Y.227.1.CAT.FXSC Note: It is mounted in a lateral position
ATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.1.DBHOM.FXSC
Furore-X Inox
Full system exhaust, including removable db killer Y.227.1.DBHOM.FXSC
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
Y.227.1.RACEDB.FXSC
Furore-X Inox
Full system exhaust, including removable db killer Y.227.1.RACEDB.FXSC Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.Y.227.1.CAT.M3.INOX
M3 Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.Y.227.1.CAT.M3.INOX Note: It is mounted in a lateral position
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.1.DBHOM.M3.INOX
M3 Inox
Full system exhaust, including removable db killer Y.227.1.DBHOM.M3.INOX Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
Y.227.1.RACE.M3.INOX
M3 Inox
Full system exhaust, including removable db killer Y.227.1.RACE.M3.INOX Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR's New Grand Prix Evo Titanium, it has been created to celebrate 20 years of presence in the MotoGP/Moto2/Moto3 world championship, in fact, the presentation of the first Grand Prix line dates back to 2005, on the occasion of the debut with Team Konica Minolta and driver Makoto Tamada and Team LCR with driver Casey Stoner. The Silencer is conical, with a special shape starting from a diameter 90mm to arriva at 130mm of circonference and lenght that depend from the motorbike of destination. It has a sleever made in titanium realized with natural color, black endcap made through CNC machining with pentagonal exit and dbkiller.
FEATURES
• SOUND: Upgraded sound from stock exhaust.
• PERFORMANCE: Upgraded performance from stock exhaust
• QUALITY: Italian made with high-grade welding
• WEIGHT: Lighter than stock exhaust
YAMAHA
E5.Y.227.1.CAT.GPAN.TO
New Grand Prix Evo Titanium
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.Y.227.1.CAT.GPAN.TO Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR's New Grand Prix Evo Titanium, it has been created to celebrate 20 years of presence in the MotoGP/Moto2/Moto3 world championship, in fact, the presentation of the first Grand Prix line dates back to 2005, on the occasion of the debut with Team Konica Minolta and driver Makoto Tamada and Team LCR with driver Casey Stoner. The Silencer is conical, with a special shape starting from a diameter 90mm to arriva at 130mm of circonference and lenght that depend from the motorbike of destination. It has a sleever made in titanium realized with natural color, black endcap made through CNC machining with pentagonal exit and dbkiller.
FEATURES
• SOUND: Upgraded sound from stock exhaust.
• PERFORMANCE: Upgraded performance from stock exhaust
• QUALITY: Italian made with high-grade welding
• WEIGHT: Lighter than stock exhaust
YAMAHA
Y.227.1.RACEDB.GPAN.TO
New Grand Prix Evo Titanium
Full system exhaust, including removable db killer Y.227.1.RACEDB.GPAN.TO Note: It is mounted in a lateral position
It is mounted in a lateral positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.Y.227.1.CAT.SAT
Satinox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.Y.227.1.CAT.SAT Note: It is mounted in a lateral position
It is mounted in a lateral positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
Y.227.1.DBHOM.SAT
Satinox
Full system exhaust, including removable db killer Y.227.1.DBHOM.SAT Note: It is mounted in a lateral position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.CO.Y.230.CAT.ALBE5
Albus Evo4
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.CO.Y.230.CAT.ALBE5 Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
CO.Y.230.1.DBHOM.ALB
Albus Evo4
Full system exhaust, including removable db killer CO.Y.230.1.DBHOM.ALB Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.CO.Y.230.CAT.DUAL.IO
Dual Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.CO.Y.230.CAT.DUAL.IO Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.CO.Y.230.CAT.DUAL.PO
Dual Poppy
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.CO.Y.230.CAT.DUAL.PO Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.CO.Y.230.CAT.FNE5
Furore-X Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.CO.Y.230.CAT.FNE5 Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
CO.Y.230.1.DBHOM.FNE5
Furore-X Inox
Full system exhaust, including removable db killer CO.Y.230.1.DBHOM.FNE5 Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.CO.Y.230.CAT.M3.BT
M3 Black Titanium
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.CO.Y.230.CAT.M3.BT Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.230.1.RACE.M3.BT
M3 Black Titanium
Full system exhaust, including removable db killer CO.Y.230.1.RACE.M3.BT Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
CO.Y.230.1.DBHOM.M3.BT
M3 Black Titanium
Full system exhaust, including removable db killer CO.Y.230.1.DBHOM.M3.BT Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.CO.Y.230.CAT.M3.INOX
M3 Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.CO.Y.230.CAT.M3.INOX Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.230.1.RACE.M3.INOX
M3 Inox
Full system exhaust, including removable db killer CO.Y.230.1.RACE.M3.INOX Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
CO.Y.230.1.DBHOM.M3.INOX
M3 Inox
Full system exhaust, including removable db killer CO.Y.230.1.DBHOM.M3.INOX Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.CO.Y.230.CAT.M3.PP
M3 Poppy
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.CO.Y.230.CAT.M3.PP Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.230.1.RACE.M3.PP
M3 Poppy
Full system exhaust, including removable db killer CO.Y.230.1.RACE.M3.PP Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
CO.Y.230.1.DBHOM.M3.PP
M3 Poppy
Full system exhaust, including removable db killer CO.Y.230.1.DBHOM.M3.PP Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E5.CO.Y.230.CAT.SAT
Satinox
Full system exhaust including removable db killer and catalyst, EPA-compliant E5.CO.Y.230.CAT.SAT Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E4.CO.Y.202.1.CAT.ALBE4
Albus Evo4
Full system exhaust including removable db killer and catalyst, EPA-compliant E4.CO.Y.202.1.CAT.ALBE4 Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.CO.Y.201.1.DBHOM.ALBE4
Albus Evo4
Full system exhaust, including removable db killer E4.CO.Y.201.1.DBHOM.ALBE4 Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E4.CO.Y.202.1.CAT.FNE4
Furore Evo4 Nero
Full system exhaust including removable db killer and catalyst, EPA-compliant E4.CO.Y.202.1.CAT.FNE4 Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.CO.Y.201.1.DBHOM.FNE4
Furore Evo4 Nero
Full system exhaust, including removable db killer E4.CO.Y.201.1.DBHOM.FNE4 Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E4.CO.Y.202.1.CAT.FXSC
Furore-X Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E4.CO.Y.202.1.CAT.FXSC Note: It is to mount in a high level position
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.CO.Y.201.1.DBHOM.FXSC
Furore-X Inox
Full system exhaust, including removable db killer E4.CO.Y.201.1.DBHOM.FXSC Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E4.CO.Y.202.1.CAT.M3.BT
M3 Black Titanium
Full system exhaust including removable db killer and catalyst, EPA-compliant E4.CO.Y.202.1.CAT.M3.BT Note: It is to mount in a high level position
Racing System with DB Killer, Not HomologatedTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.201.1.RACE.M3.BT
M3 Black Titanium
Full system exhaust, including removable db killer CO.Y.201.1.RACE.M3.BT Note: Racing System with DB Killer, Not Homologated
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.CO.Y.201.1.DBHOM.M3.BT
M3 Black Titanium
Full system exhaust, including removable db killer E4.CO.Y.201.1.DBHOM.M3.BT Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E4.CO.Y.202.1.CAT.M3.INOX
M3 Inox
Full system exhaust including removable db killer and catalyst, EPA-compliant E4.CO.Y.202.1.CAT.M3.INOX Note: It is to mount in a high level position
Racing System with DB Killer, Not HomologatedTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
CO.Y.201.1.RACE.M3.INOX
M3 Inox
Full system exhaust, including removable db killer CO.Y.201.1.RACE.M3.INOX Note: Racing System with DB Killer, Not Homologated
It is to mount in a high level positionATTENTION: this article is homologated / approved for noise only, it is sold without catalyst but including the removable db killer, the customer must check in advance whether the presence of the catalyst is necessary in his country to comply with the regulations for circulation on the road network and to arry out the annual inspection. Tampering with the DB Killer and catalyst welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads may does not comply with regulations governing circulation on the public road network.Assembly: This kit includes the specific manifold stainless steel made, with relative flanges, bushings, brackets and any screws. This allows for installation without any structural changes. The installation also involves the elimination of the catalyst and for this reason it may not be suitable for official vehicle maintenance.
YAMAHA
E4.CO.Y.201.1.DBHOM.M3.INOX
M3 Inox
Full system exhaust, including removable db killer E4.CO.Y.201.1.DBHOM.M3.INOX Note: It is to mount in a high level position
It is to mount in a high level positionTo install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
For on-line purchases, activate the warranty by sending the installation receipt from the mechanic / shop via email to certificato@gpr.it, or sending the sales receipt from the physical or online store.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair. GPR supplies a 304 stainless steel manifold including and homologated catalyst. The package includes flanges, bushings, brackets. It mounts directly on the cylinders without any structural changes.
YAMAHA
E4.CO.Y.202.1.CAT.M3.PP
M3 Poppy
Full system exhaust including removable db killer and catalyst, EPA-compliant E4.CO.Y.202.1.CAT.M3.PP Note: It is to mount in a high level position
We inform you that we use first- and third-party cookies in order to improve the performance of the page and for analytical and advertising purposes. If you want more information or would like to manage them, please go to the Cookie settings.
Manage preferences
MandatoryAnalytics and advertising
Technical: These are necessary for navigation and the proper functioning of our website. They allow, for example, to control traffic and data communication, access restricted areas, complete the purchase process, use security features, store content to broadcast videos, or share content through social networks.
Personalization: These allow the User to access the service with predefined characteristics based on a series of criteria, such as language, the type of browser used to access the service, the regional settings from which the service is accessed, etc.
Finality
Provider
Name
Administration
Function
Vigency
Technical
Own cookie
validacions_cookies
Own
Managing cookie acceptance.
1 year
Personalization
Own cookie
(Aleatory)
Own
Visitor session management.
At the end of the browser session.
De análisis: son aquellas que, tratadas por nosotros o por terceros, nos permiten cuantificar el número de usuarios y así realizar la medición y análisis estadístico de la utilización que hacen los usuarios del servicio ofertado. Para ello se analiza su navegación en nuestra página web con el fin de mejorar la oferta de productos o servicios que le ofrecemos.
